Download Print this page

Stove Guard Guardian 2010 Installation & Operating Manual

Electronic safety device for use with electric stoves

Advertisement

Quick Links

Thank you for your purchase. STOVE GUARD is an electronic safety device for use with electric stoves. It turns the stove
OFF when you forget by using the advanced technology found in security monitoring devices and a specially
programmed microcontroller.
STOVE GUARD controls the stove's electrical system to help prevent food and pots from burning, as well as reducing the
risk of fire caused by unattended cooking.
STOVE GUARD is preset at the factory at the highest fire safety setting.
This is the recommended setting for use by anyone with Alzheimer's or similar medical condition.
  When properly installed, adjusted, and set in AUTO mode, STOVE GUARD will automatically shut the
electric stove OFF if no one is present in the monitored cooking area for a preset period of time.
  Upon returning to the cooking area, STOVE GUARD will detect their presence and automatically turn the
stove ON again. The preset time will reset to the last setting.
  STOVE GUARD can also be used in a TIMER mode to set a maximum cooking time, after which the
stove will be automatically turned OFF.
In most situations the installation of STOVE GUARD does not require the use of a licensed Electrician. Read this manual
first to familiarize yourself before installing, hire a professional if you are uncomfortable with doing the installation
yourself.
Do not disassemble any of the components. There are no user serviceable parts inside. Refer servicing to a
qualified person only.
A licensed Electrician must install STOVE GUARD if the stove is presently hard -wired (not plugged
into an existing 4 Prong range wall outlet) or uses an outdated range wall outlet.
DO NOT INSTALL
the EMU (Electronic Monitoring Unit):
Directly above a heat source or where hot/cold air or steam will blow onto it.
On or above a microwave or toaster oven,
Directly on or above the stove.
STOVE GUARD must only be connected to a 220-240VAC grounded (4 prong) range wall outlet.
Do not allow grease to build up on the sensing unit. This will reduce STOVE GUARD's sensing range and possibly turn the
stove OFF even when someone is at the stove.
Clean the outer surface of the EMU with a clean, damp cloth only. Do not use soaps or cleaning liquids.
STOVE GUARD must be tested with the individual who requires this device and adjusted to their personal needs, as
well as adjusted to the home environment of use to ensure proper functioning. Additional fire safety devices; such as
smokedetectors & fire extinguishers must also be used to ensure complete cooking fire safety.
Please Keep This Manual for Future Reference
Guardian 2010 Model
IMPORTANT WARNING
IMPORTANT TECHNICAL SAFEGUARDS
Page 1 of 1
INSTALLATION & OPERATING MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the Guardian 2010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Stove Guard Guardian 2010

  • Page 1 STOVE GUARD must only be connected to a 220-240VAC grounded (4 prong) range wall outlet. Do not allow grease to build up on the sensing unit. This will reduce STOVE GUARD's sensing range and possibly turn the stove OFF even when someone is at the stove.
  • Page 2: Power Box

    3. Rocker Switch to Control 120V Power (Must be set during installation) 4. Cord to EMU Front 5. Mounting Brackets View 6. 220-240V Stove Receptacle EMU - ELECTRONIC MONITORING UNIT STOVE GUARD AUTO SG OFF STOVE OFF GUARDIAN SENSOR TIME TIMER 8.
  • Page 3 3. Installation of the STOVE GUARD Power Box on the wall or on the floor is a position that will allow the stove to be pushed back tight to the wall again (Do not fasten the Power Box to the stove itself).
  • Page 4 Display will show number of minutes left before Stove Guard turn off the stove if no movement is detected. If no movement is detected (user turn on the stove and left kitchen) for the preset time Stove Guard will turn off the stove, display will show and red Stove Off indicator (#12 on EMU diagram) lights.
  • Page 5 For the safety reason, after a power failure, if power goes off and return back, the Stove Guard will "wake-up" in AUTO mode with stove shut off. Display shows PO. The infrared sensor will not reset clock to preset time until user press any button.
  • Page 6 INSTALLATIONS. The Stove Guard has added a counter cycle that will record each time the unit turns the stove off. This feature is important for managed-care type situations to monitor the users use, to determine how many times they forgot about their electric stove.
  • Page 7: Troubleshooting

      To RAISE the detection field when the EMU cannot be located higher, slowly turn the screw to the LEFT . 2. STOVE GUARD is not detecting the movements of the user because its location is set very high up; the user is very short, or seated in a wheelchair.
  • Page 8 When there was a loss of power (Electrical Outage) the STOVE GUARD keeps the stove turned off until user press any button. The Stove Guard keeps user settings. There is no need to be adjusted to your own personal needs again.