Advertisement
NOTE: The larger your device the longer it will take to format. The device
may take many minutes to format, this is not a malfunction, please wait for
the formatting to finish.
•
If the disk for PVR is ready, the programs can be recorded
in DTV mode.
In DTV mode, press " / ▶
program, press it again to continue play. The length of
time a program can be paused depends upon the setting
in the PVR File System. Press "EXIT" to stop the time shift.
Press the PLAY button to continue playing the program
from the point where it was paused.
NOTE: Time Shift will stop if you change channels or
change inputs.
1. Select the desired channel then press the "•" button
on the remote control to start recording the current
broadcast, a progress bar will be displayed at the
bottom of the screen.
2. Recording stops when you press the EXIT button
and the recorded file is stored in the external USB
device automatically.
NOTE: You can only watch channels on the same frequency as the program
being recorded. If you try to change to another channel or come to the main
interface a message will appear prompting you to continue or not "STOP
RECORDING. System will stop record if user want to channel up/down, Confirm
or Cancel."
This unit is able to record while in standby mode.
Note: Start a recording then press the power button. A message will be
displayed prompting you to standby, stop or cancel.
: Test your disk speed.
" button to pause the DTV
▋▋
22
Advertisement
