Turning On The Computer - Gigabyte W270BUQ User Manual

Turning On the Computer

Now you are ready to begin using your computer. To turn it on simply press the pow-
er button on the front panel.
When the computer is on, you can use the power button as a Stand by/Hibernate/
Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and
holding the power button for longer than this will shut the computer down). Use
Power Options in the Windows control panel to configure this feature.
Note that you should always shut your computer down by choosing the Shut Down com-
mand from the bottom right of the Start menu in Windows. This will help prevent hard disk
or system problems.

Shut Down
Power Management
Forced Off
If the system "hangs",
and the Ctrl + Alt + Del
key combination doesn't
work, press the power
button for 4 seconds, or
longer, to force the sys-
tem to turn itself off.
Power Button as
Stand by or
Hibernate Button
You can use the OS's
"Power Options" control
panel to set the power
button to send the sys-
tem into Stand by or Hi-
bernate mode (see your
OS's documentation, or
"Configuring the Pow-
er Buttons" on page 3
- 8 for details).
Turning On the Computer 3 - 3

3