Super Io Coniguration - ASROCK 960GM-VS3 FX User Manual

3.4.6 Super IO Coniguration

Advanced
Configure Super IO Chipset
Serial Port Address
Infrared Port Address
Parallel Port Address
Parallel Port Mode
EPP Version
ECP Mode UMA Channel
Parallel Port IRQ
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Serial Port Address
Use this item to set the address for the onboard serial port. Coniguration
options: [3F8 / IRQ4] and [3E8 / IRQ4].
Infrared Port
Use this item to enable or disable the onboard infrared port.
Infrared Port Address
Use this item to set the address for the onboard infrared port.Coniguration
options: [2F8 / IRQ3] and [2E8 / IRQ3].
Parallel Port Address
Use this item to set the address for the onboard parallel port.
Coniguration options: [378] and [278].
Parallel Port Mode
Use this item to set the operation mode of the parallel port. The default
value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the
EPP version in the following item, "EPP Version". Coniguration op-
tions: [Normal], [Bi-Directional] and [ECP+EPP].
EPP Version
Use this item to set the EPP version. Coniguration options: [1.9]
and [1.7].
ECP Mode DMA Channel
Use this item to set the ECP mode DMA channel. Coniguration
options: [DMA0], [DMA1] and [DMA3].
Parallel Port IRQ
Use this item to set the IRQ for the parallel port. Coniguration options:
[IRQ5] and [IRQ7].
BIOS SETUP UTILITY
[3F8 / IRQ4]
[Disabled]
[378]
[ECP+EPP]
[1.9]
[DMA3]
[IRQ7]
47
Allow BIOS to Enable
or Disable Floppy
Controller.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit