Bluetooth Operation - Goodmans GDSB02BT45 User Manual

4 Operation

Bluetooth Operation

4.1 Pairing a device
1. Wake the unit from STANDBY mode if not powered on
already.
2. If the unit is already powered on and in a mode other than
bluetooth, press the MODE button on the side (D) or on the
remote control (R) repeatedly until the LED mode indicator
turns blue.
3. When entering Bluetooth mode the blue LED will flash to
indicate the Soundbar is in pairing mode, with no device
connected.
4. Enable Bluetooth on your audio device and search for
available bluetooth connections. Select the GDSB02BT45
from the list. If you are asked for a pass code enter '0000'.
If you turn off either device before pairing is complete the
process will need to be repeated when powered on again.
If you do not see 'GDSB02BT45' press the PAIR button (G or
L) to re-initiate pairing mode.
5. Once paired the blue LED will stop flashing.
Each time you switch the Soundbar on and select Bluetooth
mode the device will automatically connect, unless you have
un-paired the device.
6. You can now begin playback from the audio device and the
output will playback through the Soundbar.
7. Should you wish to un-pair a connected device and
connect another, press the PAIR button on the side (G) or
on the remote control (L).
The volume output is effected by the volume level on the audio
source EG: Phone or laptop, so make sure that is set to about
70-80% (not too loud to avoid distortion).
8. Adjust the VOLUME on the unit to the required listening
level.
PAIR MODE
EQ
FLAT
PAIR MODE
EQ
FLAT
GDSB02BT45