Fujitsu Laptop User Manual page 48

3. Pull out the tray gently.
Critical Point
If the tray will not comes out
If the computer is turned off, turn it on, and then press the CD eject button.
You can press the eject button at any time, even when
LED blinks.
4. Remove the disk while holding the tray with a hand.
Lift the edge of the disc while pressing down the stopper at the center of the tray. At that time, be
careful not to hit the disc against the computer main unit.
Tray
5. Push the tray gently into the drive.
Tray
Stopper
on the operating status indicator
33