Table of Contents
Advertisement
Interface Configuration Mode
ipv6 nd retrans-timer <seconds>
(14) Set the flag representing whether information other than the address information will be obtained via
DHCPv6.
Interface Configuration Mode
ipv6 nd other-config-flag
(15) Set the flag representing whether the address information will be obtained via DHCPv6
Interface Configuration Mode
ipv6 nd managed-config-flag
3. IPv6 Tunnel Configuration
(1) Add/Delete tunnel
Global mode
interface tunnel <tnl-id>
no interface tunnel <tnl-id>
(2) Configure tunnel description
Tunnel Configuration Mode
description <desc>
no description
(3) Configure tunnel source
Tunnel Configuration Mode
tunnel source { <ipv4-address> |
<ipv6-address>| <interface-name> }
no tunnel source
(4) Configure Tunnel Destination
Command
Command
Command
Command
Command
Command
Set the retrans-timer of sending router
advertisement.
Explanation
Set the flag representing whether
information other than the address
information will be obtained via DHCPv6.
Explanation
Set the flag representing whether the
address information will be obtained via
DHCPv6.
Explanation
Create a tunnel. The NO command
deletes a tunnel.
Explanation
Configure tunnel description. The NO
command deletes the tunnel description.
Explanation
Configure tunnel source end IPv4/IPv6
address. The NO command deletes the
IPv4/IPv6 address of tunnel source end.
Explanation
22-37
Advertisement
Table of Contents
Troubleshooting
