Table of Contents
Advertisement
Getting to Know Your Axcess
How Do I Turn On Axcess?
Press the
button on front panel or
POWER
Axcess on. Axcess is always in one of four power states:
State:
Power Off: The
standby light is off
and no text
appears on Axcess'
display panel.
Initializing: The
Standby light turns
off after illuminat-
ing briefly.
Standby: The
Standby light is
solid red.
Power On: The
display panel
shows text and the
Standby light is off.
12
Meaning:
Axcess is
unplugged.
Axcess is
initializing
(starting up).
Axcess is plugged
in, but not in use.
Axcess is
powered and
running.
Axcess automatically configures itself, but if it fails to do so,
follow the manual procedure. Axcess will prompt you to
manually enter the network settings (IP address, gateway
address, network mask and DNS address). Get this
Complete Guide to Your Axcess Remote Portal
on the remote to turn
POWER ON
Action:
1. Plug Axcess in.
2. Press
POWER ON
remote, or
Axcess' front panel. Axcess
will go through an auto-
matic network configura-
tion, which may include
automatically downloading
updated software from
Entré.
Press
POWER ON
or
on Axcess' front
POWER
panel.
Press
POWER ON
or
on Axcess' front panel
POWER
to begin using Axcess.
Press
POWER OFF
or
on Axcess' front panel
POWER
to return the system to standby.
on the
on
POWER
Do not press
any buttons on
either Axcess'
front panel or
remote control
until the
configuration
process is
complete.
on the remote,
on the remote,
on the remote,
Advertisement
Table of Contents
