Table of Contents
Advertisement
Setting Up and Configuring Your Axcess
How Do I Connect Axcess to an Auxiliary Audio Source?
This is an optional connection. You don't have to complete it to use Axcess.
You can use the
speakers connected to
Axcess to listen to
sound from another
device (such as your
TV's audio output).
Connect stereo audio
cables from the
device's audio outputs
to Axcess' AUX inputs.
Once you've made this
connection, press
AUX
on your remote or on the front panel of Axcess to listen to this device. For more information about using Axcess'
auxiliary function, see "How Do I Switch Modes?" on page 14 in How to Use and Enjoy Your Axcess Remote Portal.
Do not connect Axcess' AUX IN and LINE OUT terminals to the same device (such as a tape
recorder). This can create a feedback loop that could damage Axcess and the connected device.
How Do I Connect Axcess to an External Power Amplifier?
You can use
Axcess as the
audio source for
a more powerful
audio system by
connecting it to
an external
power amplifier,
which can then
be used to drive
larger speakers.
Once you've
connected Axcess to the external amplifier, Axcess' volume control will control the volume of the amplifier and the
speakers connected to it.
Connect stereo audio cables from Axcess' LINE OUT outputs to the amplifier's inputs. To connect the amplifier to
the speakers, refer to the amplifier and speaker instruction manuals.
Do not connect Axcess' AUX IN and LINE OUT terminals to the same device (such as a tape
recorder). This can create a feedback loop that could damage Axcess and the connected device.
How Do I Set Up Entré to be Recognized By Axcess?
Once you have connected Axcess and Entré to your network, you need to activate Entré's secondary network
connection and name the network. Once you do, Axcess will be able to recognize Entré on your network.
1. Press
on the Entré remote.
SETUP
2. Select
INTERNET CONFIGURATION
3. Select
NETWORK CONNECTIONS
6
.
.
Complete Guide to Your Axcess Remote Portal
Advertisement
Table of Contents
