Read this section carefully to ensure safe operation. The Kenwood Axcess is designed for operation only on AC 120V current. Axcess must be connected to a 120V AC outlet that supplies constant voltage. Do not use an outlet controlled by a switch, or the switched power outlet on a receiver or other audio component.
Establishing a Connection via Dial-Up If you use a dial-up connection for Entré, you will not be able to listen to Internet Radio on Axcess. All of Axcess’ other functions will operate normally. Connect the components according to the following illustration: Entré...
If you use a broadband Internet connection and you connect Entré to the Internet via a Universal Serial Bus (USB)/Ethernet adaptor and an HPNA/Ethernet bridge, you will be able to use all of Axcess’ functions including Internet Radio. Connect the components according to the following illustration: Entré...
You can also make a broadband connection from Entré to the Internet via its USB connector and an Ethernet adaptor without using an HPNA/Ethernet bridge for Axcess. However, you will not be able to listen to Internet Radio on Axcess. All of Axcess’ other functions will operate normally.
2. Connect the other end of the telephone cord to the telephone jack on the wall or directly to Entré. Axcess Connection to Wall Telephone Jack If you have more than one phone line, be sure to connect Axcess to the same phone line that Entré uses.
Axcess to listen to this device. For more information about using Axcess’ auxiliary function, see “How Do I Switch Modes?” on page 6 in How to Use and Enjoy Your Axcess Remote Portal.
Read-Only Memory (ROM). Return your unit to an authorized service outlet for repair. Once this process is complete, Axcess enters the AUX input mode. You can then choose to listen to an auxiliary souce (if connected), or switch to playing music or Internet Radio. For more information about using Axcess, see “Enjoying Your Music Collection”...
Axcess can connect “on the fly” to any Entré connected to your HomePNA network. If you have more than one Entré on your network, you will need to select which one Axcess should use. You can perform this step at any time to setup or change which Entré...
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Internet www.kenwoodusa.com e-mail email@example.com Telephone 1-800-KENWOOD Main Office P.O. Box 22745 Long Beach, CA 90801-5745...