Unlocking The Projector; Security Function Notice - Sanyo PDG-DWT50L Service Manual

6-2 Unlocking the Projector

To unlock the projector, refer to the following guide.
1.
When the projector is locked,
either by request during
operation or at start up, the
locked message is displayed.
2.
To unlock the projector, press
Menu on the control panel or
remote control. The keyword
window is displayed. Enter the
previously defined keyword to
activate the projector.

6-3 Security Function Notice

if you are not know the PIN code lock or key lock code and required to repair the projector, or a customer forgot
the security code, you can use the special key to release these function.
1. Press and hold the "Auto PC" button on the projector for more than 20 sec.
2. Both of the security functions will be reset to the default setting.
- 61-
PDG-DWT50L