• IMPORTANT: Always unplug the appliance when not in use or before cleaning. Do not leave unattended when plugged in or switched on. Do not place on any heat sensitive surface and always wallow to cool before storing away. VS7702A-IB.indd 2-3 VS7702A-IB.indd 2-3 4/2/09 4:13:36 PM 4/2/09 4:13:36 PM...
Page 3
11. Personal groomer for trimming nose and ear hair 12. Protective cover for personal groomer blade Accessories: 13. Scissors 16. Lubricating oil 14. Cleaning brush 17. Storage pouch 15. Barber comb VS7702A-IB.indd 4-5 VS7702A-IB.indd 4-5 4/2/09 4:13:36 PM 4/2/09 4:13:36 PM...
North America, Japan, Canada 120V the mains power supply and disconnect from the appliance. plugs: 120V (parts of) 5. A full charge will supply enough power for minimum 30 minutes use. VS7702A-IB.indd 6-7 VS7702A-IB.indd 6-7 4/2/09 4:13:51 PM 4/2/09 4:13:51 PM...
Page 5
(NB – When using the clipper without the comb guide attachment, the cutting length will be below 3mm. The length setting shown on the side of the product will no longer be relevant when the comb guide is removed). VS7702A-IB.indd 8-9 VS7702A-IB.indd 8-9 4/2/09 4:13:52 PM 4/2/09 4:13:52 PM...
Page 6
To remove the precision comb guide, adjust the comb guide to the shortest setting. Switch the product off and then push the precision comb guide out of the support by lifting it up with your thumb. VS7702A-IB.indd 10-11 VS7702A-IB.indd 10-11 4/2/09 4:13:53 PM...
Page 7
- Take up a small section of hair with a comb or in your fingers. - Move the comb or your fingers along the section of hair to the desired length. - Cut your hair along the comb or your fingers. VS7702A-IB.indd 12-13 VS7702A-IB.indd 12-13 4/2/09 4:13:54 PM 4/2/09 4:13:54 PM...
Page 8
For best results, gently move the trimmer in and out of the nose as you trim ans rotate the hair. VS7702A-IB.indd 14-15 VS7702A-IB.indd 14-15 4/2/09 4:13:54 PM...
Need help?
Do you have a question about the TURBO-PRO VS7702A and is the answer not in the manual?
Questions and answers