Planex FNW-9802-T User Manual page 39

10. If TCP/IP protocol has been installed, the IP address entry screen will
appear. Enter the IP address, sub net mask, gateway address and other
required values and click on the "Apply" button. Consult with your
network administrator and if required, set DNS and WINS addresses as
well. When these values have been entered, click on the "OK" button.
65
FNW-9802-T
11. Remove the floppy diskette and click on the "OK" button to restart the
computer.
12 After the system has restarted, proceed to "5-2 Verifying the Installation"
and check whether the driver has been installed properly.
FNW-9802-T
66