Driver Installation - Planex FNW-9802-T User Manual

6. Click on the "OK" button.
7. Click on the "OK" button again. You will be asked to restart the
computer. Click on the "OK" button to restart your computer.
43
Installation under WindowsNT 4.0
FNW-9802-T
5
1
This chapter describes how to install and configure the driver for the FNW-
9802-T Ethernet adapter under WindowsNT 4.0.
Note :
In order to use the FNW-9802-T Adapter under WindowsNT4.0, Service
Pack 3 or later has to be implemented on WindowsNT 4.0. Before
proceeding with the installation, make sure to implement ServicePack3 on
WindowsNT4.0.
5
1
1. Insert the FNW-9802-T into a PCI slot of your computer and switch on
the computer to start WindowsNT4.0.
2. Open "My Computer" and then "Control Panel".
3. Double click on the "Network" icon.

Driver Installation

Setting up a network for the first time
1
Chapter 5
44