5. Select "Media Type" from the Property and set "Value". You can choose
one of the following settings.
Auto Sense :
The communication rate (100Base-TX/10Base-T) and the communication
mode (full-duplex/half-duplex) are automatically set by the Auto-
Negotiation function.
10BASET :
The communication rate will be fixed to 10BASE-T/half-duplex.
10BASET Full Duplex :
The communication rate will be fixed to 10BASE-T/full-duplex.
100BASETX :
The communication rate will be fixed to 100BASE-TX/half-duplex.
100BASETX Full_Duplex :
The communication rate will be fixed to 100BASE-TX/full-duplex.
27
FNW-9802-T
6. Click on the "OK" button.
7. Click on the "OK" button again. You will be asked to restart the
computer. Click on the "OK" button to restart your computer.
FNW-9802-T
28