Basic Settings - Kawai CA97 concert artist Owner's Manual

Basic Settings

The Basic Settings menu contains settings to adjust the pitch, tuning, and general sound of the instrument.
This menu also allows favourite panel settings to be stored, or reset back to the original factory configuration.
Basic Settings
No. Setting
1 Key Transpose
2 Song Transpose
3 Tone Control
4 Speaker Volume
5 Line In Level
6 Wall EQ*
7 Tuning
8 Damper Hold
9 Split
10 Four Hands
11 LCD Contrast
12 Startup Setting
13 Factory Reset
14 Auto Power Off
* The Wall EQ setting is available on the CA97 model only. Settings page numbers shown will differ on the CA67 model.
* Default settings will be shown in the first LCD display illustration (i.e. Step 1) for each setting explanation below.
Entering the Basic Settings menu
While the normal playing mode screen is shown in the LCD display:
Press the FUNCTION button (ENTER).
The Function menus will be shown in the LCD display.
Press the FUNCTION button (ENTER) again to enter the Basic
Settings menu.
Selecting and adjusting the desired setting
After entering the Basic Settings menu:
Press the or buttons to move the selection cursor over the
desired setting.
Press the or buttons to adjust the selected setting.
* To reset the current setting to the default value, press the
buttons simultaneously.
64
Description
Raise or lower the pitch of the keyboard in semi-tone steps.
Raise or lower the pitch of the recorder/MIDI song in semi-tone steps.
Change the EQ settings of the instrument's sound.
Change the maximum volume level of the speaker output.
Adjust the input volume of the Line In connectors.
Optimise the instrument's speaker system based on instrument placement.
Raise or lower the pitch of the instrument in 0.5 Hz steps.
Change the effect of pressing the sustain pedal on organ, string, etc. sounds.
Enable the 'Split Mode' function.
Enable the 'Four Hands Mode' function.
Adjust the contrast of the instrument's LCD display.
Store current panel settings as the default (power-on) configuration.
Restore all panel settings to the original factory configuration.
Enable/disable the instrument's Auto Power Off energy saving function.
and
Default setting
0 (C)
0
Off
Normal
0 dB.
Off
440.0 Hz
Off
Off
Off
5
-
-
-
buttons:
Adjust selected setting.
buttons:
Move selection cursor.