Lenovo E1922s Wide User Manual page 23

3-6 E1922s Wide Flat Panel Monitor User's Guide
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
Note: You must download the driver of your operation system from the Lenovo website
(http://support.lenovo.com/E1922swD)
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot
into Windows 7 operating system.
4. Open the Display Properties window by clicking Start, Control Panel and then
click the Hardware and Sound icon.
5. Click the Display icon.
6. Click the Adjust Resolution button.
7. Click the Advanced Settings button.
8. Click the Monitor tab.
9. Click the Properties button.
10.Click the Driver tab.
11. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on
Update Driver and then click the "Browse my computer for driver software" button.
12. Select "Let me pick from a list of device drivers on my computer".
Click the Have Disk button. Click the Browse button and navigate to the directory that you
13.
put your download drivers in.
14. Select the " E1922swD.inf "file and click the Open button. Click the OK button.
15. Select Lenovo E1922s Wide and click Next
hard disk drive.
Close all open windows.
16.
17. Restart the computer.
The system will automatically select the maximum refresh rate and corresponding
color matching profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1366 x 768 at a refresh rate of 60 Hz, or 640 x 480
at a refresh rate of 60 Hz.
. The files will be copied from the directory to your