Mazda 2015 5 Owner's Manual page 284

Interior Comfort
Bluetooth® Hands-Free
8. Say: [Beep] XXXXX... (Ex. device
C)
9. Prompt: New name please?
10. Say: [Beep] XXXXX... (Ex. device
C) (Speak a device tag , an
arbitrary name for the device.)
11. Prompt: XXXXX... (Ex. device C)
(Device tag), is this correct?
12. Say: [Beep] Yes
13. Prompt: New name saved.
qSecurity Setting
If a passcode is set, the system cannot be
activated unless the passcode is input.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
Passcode setting
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] Setup
3. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Passcode
5. Prompt: Passcode is disabled. Would
you like to enable it?
6. Say: [Beep] Yes
7. Prompt: Please say a 4-digit
passcode. Remember this passcode. It
will be required to use this system.
8. Say: [Beep] XXXX (Say a desired 4-
digit passcode, PCode .)
6-88
9. Prompt: Passcode XXXX (Passcode,
PCode). Is this correct?
10. Say: [Beep] Yes
11. Prompt: Passcode is enabled.
®
Using Bluetooth Hands-Free with a
passcode
1. Press the pick-up button or talk button
with a short press.
2. Prompt: Hands-Free system is
locked. State the passcode to
continue.
3. Say: [Beep] XXXX (Say the set
passcode PCode .)
4. If the correct passcode is input, voice
guidance XXXXXX... (Ex. Mary's
device ) (Device tag) is connected is
announced.
If the passcode is incorrect, voice
guidance XXXX (4-digit passcode,
Pcode) incorrect passcode, please try
again is announced.
Canceling the passcode
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] Setup
3. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Passcode
5. Prompt: Passcode is enabled. Would
you like to disable it?