Mazda 2015 5 Owner's Manual page 236

Interior Comfort
Audio System
(Registered ID code input preparation)
2. Press and hold the scan button (
then press channel preset button 6.
Hold both buttons together for 1.5
seconds.
3. ENTER PIN appears for three
seconds which indicates that it is in
code input mode.
4. SR1 - - - - appears, which indicates
that it is ready for code input.
(Registered ID code input)
5. Input the registered ID code using
channel preset buttons 1-4. Example:
When the registered ID code is 2323 ,
input 2323 . At this time SR1 2323
is displayed.
NOTE
If "Err" is displayed, go to the
"INITIALIZATION OF ID CODE" section to
reset the ID code to [0000].
(Registered ID code input
determination)
6. Determine the input code by pressing
the scan button (
7. If it does not match the registered code,
SR1 Err is displayed and then it
returns to SR1 - - - - .
8. If it matches the registered code,
SR1 UNLOCK appears for three
seconds which indicates that the code
input has been completed.
9. SR1 100 appears which indicates that
the parental lock is off. At this time,
sound is heard.
6-40
),
).
NOTE
If an ID code is not input for ten seconds,
l
"Err" is displayed and it returns to the
former display.
Channel preset buttons 1, 2, 3, 4 and the
l
scan button ( ) are used for input of
the ID code. Buttons 5 and 6 cannot be
used.