Timer Operations; Timer Playback, Timer Recording - Kenwood DMF-3020 Instruction Manual

Timer operations

Playback or recording can also be activated at the desired
time by using a commercially available timer.
50
Connect the power cords of the associated components so
that their power can be turned ON through the audio timer.
Also, be sure to read carefully the instruction manual of the
timer.
Do not set timer recording in a way that the power is not turned
ON for more than 3 days; otherwise, the last recorded data
may be cleared.
Refer to "Memory backup".

Timer playback, timer recording

1
Turn the powers of the associated components ON.
2
Make preparations.
For timer playback
Load a prerecorded Mini
Disc.
3
Set the amplifier volume.
For timer playback
1
Play the Mini Disc.
2
Adjust the amplifier vol-
ume.
3
Stop the disc.
4
Set the TIMER.
For timer playback
TIMER
REC OFF PLAY
5
Set the timer ON time.
For timer playback
Set the timer so that it sup-
plies power at the specified
time.
9
For timer recording
1
Load a recordable Mini
Disc.
2
Receive the desired radio
station.
3
Select the desired mode
with the REC INPUT key.
¶
4
Adjust the recording level.
For timer recording
Minimize the amplifier vol-
ume.
For timer recording
TIMER
REC OFF PLAY
For timer recording
Set the timer so that the
tuner reception can be
started at the desired time
of the day.
Amplifier
Audio cord
Audio cord
DMF-5020/DMF-3020/MD-203
÷ Set the POWER key of the unit to ON.
÷ For timer recording, be sure to set the write protect tab to enable
recording.
÷ For timer recording, be sure to check the remaining recording time.
÷ When the set time comes, the disc playback or recording starts
automatically. (Also be sure to read the instruction manual of the
connected component carefully.)
÷ After having set the timer, be careful not to press the ON/STANDBY
key of the remote control unit to ON; otherwise the timer operation
would be activated.
DMF-5020/DMF-3020/MD-203 (En)
Tuner
Audio timer
8
o