Compliance - Targus USB Mobile Mini Hub User Manual

&  "      ! !      
When you initially connect the Mini Hub to your notebook computer,
 
Windows 98 detects new hardware, and then looks for software drivers.
These drivers are located at C:\windows\options\cabs or on your Windows
98 CD.
Select the CD-ROM drive location or use the browse button to specify a
 
location. Click OK to continue.
Windows 98 finishes the driver software installation. You are now ready to
use the USB Mobile Mini Hub.
The USB Mobile Mini Hub has individual port auto-shutdown protection against
power overload. The benefit of this feature is that in the case of excessive power
consumption from a USB device attached to the Mini Hub, the port will
automatically shut down. This prevents damage to the Mini Hub as well as to the
connected computer. If an error does occur and the port shuts down, follow the
steps listed below.
' ( ) * ( ) *
+ , - -  ' . & / . 0 1      & #       &  ! "  1       2   
Each port will indicate it has shut down by turning on its red LED indicator. If this
has occurred and you are using the AC adapter, the Mini Hub must be reset.
Disconnect the device from the affected USB port.