Problem Solving Guide; Technical Problems - Miele G 5585 SCVi Operating Instructions Manual

Problem solving guide

With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to
property.

Technical problems

Problem
The dishwasher does
not start.
The dishwasher
stops during a
programme.
After the programme
has started, the
In-operation indicator
light is not visible.
50
Possible cause
The door is not properly
closed.
The appliance is not
plugged in.
The mains fuse has
tripped.
The appliance is not
switched on.
The mains fuse has
tripped.
The reflector panel was
not correctly fitted.
Remedy
Push the door firmly shut.
Insert the plug and switch on
at the socket.
Reset the trip switch or
replace the fuse in the plug.
(Minimum fuse rating - see
data plate).
Press the On/Off button K
and select a programme.
– Reset the trip switch or
replace the fuse in the
plug (minimum fuse rating
- see data plate).
– If the mains fuse trips
again, call the Miele Ser-
vice Department.
Re-fit the reflector panel
correctly (see Installation
diagram).