Heat & Glo Bravo Owner's Manual page 34

Note: Previous numbers are for combustible
construction numbers. Arch may protrude up to
5-1/2 inches maximum as measured from unit
front face.
Note: The kiva-style arch depth may be any size if
using noncombustible materials i.e. concrete, steel,
plaster, etc.
• A template is provided on unit shipping carton.
Simply cut along the line and use as a template when
constructing kiva-style arch (see Figure 11.6).
CAUTION
Template for kiva-style arch represents MINIMUM inside
dimensions. When constructing kiva-style arch, you must
add thickness of fi nishing materials to achieve proper size
of fi nished arch.
BACKING
MATERIAL
FINISHING
MATERIAL
Figure 11.6
• Inside of the kiva-style arch can be fi nished using com-
bustible materials. For example, thin drywall may be
layered to form around curved arch.
34
KIVA-STYLE ARCH
STRUCTURE
Heat & Glo • Bravo • 704-902 Rev. D • 5/08
OPTION C: SOUTHWESTERN kiva-style
The third installation option illustrated is a corner-installa-
tion with custom fi nishing. This option requires advanced
fi nishing methods involving either combustible or non-com-
bustible construction materials (see Figure 11.7).
Figure 11.7
• A template is provided on the unit shipping carton.
Simply cut along the line and use as a template for
construction purposes.
• The cardboard template provided represents MINIMUM
inside dimensions of the fi nished wall surface.
• If fi nishing with plaster or drywall, a fi nish edge trim is
provided around door front on unit. Finishing materials
MUST not extend inside of the fi nish edge trim.
CAUTION
Finishing materials cut inside the provided template or inside
fi nish edge trim will cause the door not to fi t.
WARNING
Fire Risk.
Follow minimum specifi ed clearances found in
Section 16, (Appliance Dimensions Diagram)
and on fi replace exterior if using combustible
framing materials.