Advertisement
If the disk for PVR is ready, the programs can be recorded in DTV mode.
In DTV mode, press / ► button to pause the DTV
program, then press it again to continue playing. The
length of time a program can be paused depends upon
the setting in the PVR File System. Press "EXIT" to stop
the time shift.
Press the PLAY button to continue playing the program
from the point where it was paused.
NOTE: Time Shift will stop if you change channels, change
inputs or go into standby mode while in Time Shift mode.
1. Select the desired channel then press the
on the remote control to start recording the current
broadcast. A progress bar will be displayed at the
bottom of the screen.
2. Recording stops when you press the EXIT button
and the recorded file is stored in the external USB
device automatically.
NOTE: You can only watch channels on the same frequency as the program
being recorded. If you try to change to another channel or change to the main
interface screen, a message will appear prompting you to continue or "STOP
RECORDING. System will stop record if user want to channel up/down, Confirm
or Cancel."
●
button
31
Advertisement
