SonicWALL SonicPoint Quick Start Manual page 13

To add an individual user to the SonicWALL security appliance's local user database for VPN access:
1. In the management interface of your SonicWALL security appliance, click on Users in the left-
navigation menu, and then click on Local Users under Users.
2. In the Users > Local Users page, click Add User.
3. In the Add User window:
• Settings: Enter the Name and Password of the user
• Group: Select the groups the user should belong to. The user automatically has any VPN access
configured for the group.
• VPN Access: Select the networks, subnets, and IP addresses the user should have access to
when connected via GroupVPN. For example, All WAN IP, WLAN Subnets, LAN Primary Subnets,
and WLAN RemoteAccess Networks.
4. Click OK.
To configure VPN access for a group:
1. In the management interface of your SonicWALL security appliance, click on Users in the
left-navigation menu, and then click on Local Groups under Users.
2. In the Users > Local Groups page, click the edit icon
the Local Groups table, or click Add Group to create a custom group. For more information on
configuring Local Groups, refer to the "Managing Local Users and Local Groups" chapter in the
SonicOS Enhanced 2.5 Administrator's Guide.
Page 12
in the same line as any group displayed in