Scanning - Mercedes-Benz Comand Operator's Manual

Scanning

The tracks on a tape can be scanned one after the other
for 8 seconds each if there is enough blank tape
separating the individual tracks (approx. 2 seconds).
Use the rotary/pushbutton
the "Scan" function. Scan will begin and "Scan" will
appear in red. The message "Seek" will appear on the
screen.
Tape operation
Introduction
P82.85-2538-26
to highlight and confirm
Audio Telephone
To end function:
Press / on the rocker switch or press the
rotary/pushbutton . Playback then starts.
Note:
At the end of the tape, the tape will automatically
switch to the other side and scan will continue.
47
Navigation
Info Services and
system settings
Index