Kenwood KRF-V6060D Instruction Manual page 32

Ambience effects
CS II Rear Delay adjustment mode (CS II mode only)
CS II Rear Delay adjustment provides a better sound effect from the rear
speakers.
1 Press the SOUND key, then press the M M M M M / ? ? ? ? ? keys or Joystick (2/3)
until "CSII DLY" appears on the display.
2 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
rear speaker.
• The adjustment range is from 0 ms to 25 ms.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL SB SR
CS II Gain adjustment mode (CS II mode only)
CS II GAIN allows user to adjust the input gain for the Circle Surround II
processing.
1 Press the SOUND key, then press the M M M M M / ? ? ? ? ? keys or Joystick (2/3)
until "CSII GAIN" appears on the display.
2 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
input gain.
• The adjustment range is from 0 to 18.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL SB SR
TruBass adjustment mode (CS II mode only)
TruBass adjustment provides deep, rich bass sound to various speakers.
1 Press the SOUND key, then press the M M M M M / ? ? ? ? ? keys or Joystick (2/3)
until "TruBass" appears.
2 Use the MULTI CONTROL knob or Joystick (5/∞) to select the
following;
1 TruBass OFF
2 TruBass SW
3 TruBass LR
4 TruBass SW + LR
• After selecting 2, 3 or 4, TruBass speaker size and level adjustment
selection will be available.
3 For TruBass speaker selection, use the MULTI CONTROL knob
or Joystick (5/∞) to select any of the following display;
1 TruBass LARGE
2 TruBass MID
3 TruBass SMALL
4 Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
TruBass Level.
• The adjustment range is from 0 (TruBass OFF) to 10.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL SB SR
32 EN
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display's brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
1 Bright
2 Medium
RDS
3 Dark
RTY
AUTO
MEMO
STEREO
TUNED
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to "STEREO".
• In FULL AUTO input mode, the listen mode will automatically be
STEREO.
• When in DIGITAL MANUAL input mode (listen mode is not STEREO),
"FS 96kHz" will appear in the display and no sound can be heard from
the speakers.
Press the LISTEN MODE or STEREO key (the listen mode changes to
the STEREO mode) to output sound from the speakers.
RDS
RTY
AUTO
MEMO
STEREO
TUNED
RDS
RTY
AUTO
MEMO
STEREO
TUNED