Kenwood KRF-V6060D Instruction Manual page 19

Preparing for surround sound
If you selected other than "LARGE" as the center speaker
setting,
1 SURR ON
: Surround speaker setting mode to the re-
ceiver is ON.
2 SURR OFF : Surround speaker setting mode to the re-
ceiver is OFF.
• When the setting "SURR OFF" is selected, the procedure skips
to step #.
9 Press the M M M M M key or Joystick (3) again to accept the setting.
• The surround speaker setting indication "SB" appears.
0 Use the MULTI CONTROL knob or Joystick (5/∞) to select
appropriate surround back speaker setting.
If you selected "LARGE" as the surround speaker setting,
1 SB NORMAL : Average size surround back speaker is
2 SB LARGE
: Large surround back speaker is connected
3 SB OFF
: Surround back speaker setting mode to
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
SL S SB SR
If you selected "NORMAL" as the surround speaker setting,
1 SB ON : Surround back speaker setting mode to the
receiver is ON.
2 SB OFF : Surround back speaker setting mode to the
receiver is OFF.
! Press the M M M M M key or Joystick (3) again to accept the setting
and "SURR:MIX" appears.
• Surr:mix is when the SL and SR speakers signals are mixed to
produce sound from the surround back speaker which would
enable the listener to enjoy sound coming from the back.
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
SL S SB SR
@ Use the MULTI CONTROL knob or Joystick (5/∞) to select
the following.
1 SURR:MIX ON : Surround mix setting mode to the
2 SURR:MIX OFF : Surround mix setting mode to the
• If surround back speaker is turned OFF, SURR:MIX setting is not
visible and the procedure skips to step #.
# Press the M M M M M key or Joystick (3) again to accept the setting.
• The subwoofer re-mix setting indication "SW RE-MIX" appears.
$ Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate subwoofer re-mix setting.
1 SW RE-MIX ON : Subwoofer re-mix setting mode to
2 SW RE-MIX OFF : Subwoofer re-mix setting mode to
• If subwoofer is turned OFF, subwoofer re-mix setting is not
visible.
% Press the SETUP key again to return to the main setup
displays.
• The receiver enters the speaker volume level adjustment mode.
• In steps 4 and 5, indications appear only for the selected
channels of the speakers that require adjusting.
connected to the receiver.
to the receiver.
the receiver is OFF.
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
receiver is ON.
receiver is OFF.
the receiver is ON.
the receiver is OFF.
4
Adjust the speaker volume level.
From your usual listening position, adjust the volume levels. The
volume levels from each speaker should be the same.
1 Press the M M M M M / ? ? ? ? ? keys or Joystick (2/3) to select TEST TONE.
2 Press the SETUP key for the following displays:
3 The selection of AUTO/MANUAL TEST TONE is done by the
MULTI CONTROL knob or Joystick (5/∞).
Press the SETUP key again to begin TEST TONE.
Use the MULTI CONTROL knob or Joystick (5/∞) to adjust
the volume level of the test tone output from the speaker
channel to be adjusted.
For AUTO selection, the first test tone is heard from the front
left speaker for 2.5 seconds. The next test tone is heard from
the speakers in the following sequence for 2 seconds each.
The channel indication blinks while the test tone is being output.
RDS
THX
RTY
Surround EX
L C
AUTO
LFE
MEMO
STEREO
TUNED SL S SB
• If you change the volume level settings for the speakers while
listening to music, the settings referred to on this page are also
changed.
• If the speaker setting selects are OFF, the speaker level settings
are reset.
For MANUAL selection, press the M M M M M / ? ? ? ? ? keys or Joystick (2/3)
each time to select the speaker channel.
4 Press the SETUP key again.
• The test tone is turned off and return to the main setup displays.
5
Input the distance to the speakers.
RDS
THX
1 Press the M M M M M / ? ? ? ? ? keys or Joystick (2/3) to select the SP
RTY
Surround EX
AUTO
DISTANCE on setup displays and press the SETUP key again.
MEMO
STEREO
TUNED
2 Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front left speaker (L)
Distance to Center speaker (C)
Distance to Front right speaker (R) : ____ feet (meters)
Distance to Surround right (SR)
Distance to Surround back (SB)
Distance to Surround left (SL)
Distance to Subwoofer (SW)
3 Use the M M M M M / ? ? ? ? ? keys or Joystick (2/3) to select the speakers
and the MULTI CONTROL knob or Joystick (5/∞) to adjust
the distance to the front speakers.
The speaker indicator to be adjusted blinks.
L C
LFE
SL S SB
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4 Repeat steps 3 to input the distance for each of the speakers.
1 T.TONE AUTO
2 T.TONE MANUAL
LEFT CNTR
SUBW SL
CINEMA EQ.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
ACTIVE EQ.
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE
SW R
SR
SP MUTE OPTICAL 6CH INPUT CINEMA EQ.
AUTO DETECT
ACTIVE EQ.
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE
SW R
SR
Indication in feet
RIGHT
SB SR
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
º
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
RDS
DTS. DOLBY DIGITAL STEREO NEO:6
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
Indication in meters
Continued to next page
19 EN