13) Unscrew the two TORX + size 6 screws in the
order shown. Do not use them again.
15) Carefully disconnect the CONNECTION FLEX from
the PWB with the SS-93.
17) Release the ITU-T DOMESHEET and the MM
DOMESHEET with the dental tool and peel them off.
Do not use them again.
14
14) Carefully lift up the LIGHT SWAP PWB to gain
access to the CONNECTION FLEX ASSY.
16) The LIGHT SWAP PWB can now be removed.
18) Detach the first clip of the CAMERA BEZEL
assembly with the sharp end of the SS-93.
Confidential Copyright © 2009 NOKIA All rights reserved
Nokia N86 8MP
RM-484 / RM-485 / RM-486
Service Manual Level 1&2
Version 1.0
ISSUE 1