Advertisement
Quick Links
Advertisement
Related Manuals for PACIFIC CYCLE COMPACT BICYCLES 2006
Summary of Contents for PACIFIC CYCLE COMPACT BICYCLES 2006
- Page 1 HELMETS SAVE CORRECT FITTING - MAKE SURE YOUR HELMET COVERS YOUR FOREHEAD. LIVES !!! ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE YOUR SCOOTER. DO NOT RIDE AT NIGHT. AVOID RIDING IN WET INCORRECT FITTING. FOREHEAD CONDITIONS. IS EXPOSED AND VULNERABLE TO SERIOUS INJURY.
-
Page 2: Table Of Contents
PART 6 Adjusting the Frame Latch ..........15 PART 7 Adjusting the Steel Handle Post Latches ....16-17 Limited Warranty Information ..........18 PACIFIC CYCLE Customer Service 1.800.626.2811 • www.pacific-cycle.com P.O. Box 344 • 4730 E. Radio Tower Ln. • Olney, IL 62450... -
Page 3: Part 2 Safety
INSTRUCTION MANUAL: COMPACT BICYCLES SAFETY • Before riding your bike for the first time, make sure it has been checked and Thank you for purchasing your folding bicycle. Before using your bicycle, please adjusted by an authorized bicycle technician. This will validate your warranty and practice proper folding and unfolding procedures. -
Page 4: Part 3 Bicycle Terms
UNFOLDING INSTRUCTIONS BICYCLE TERMS Step 1 1. Handlebar Prepare to unfold your bicycle by standing on the 2. Handle Post side with the chain. The chain and crank will be in 3. Handle Post Latch front of you. 4. Pedal 5. - Page 5 Step 3 Step 5 Lock the frame latch lever by pushing it in towards Swing the handle post up to its vertical position. the frame. It should require 6 kg (14 lbs). of force to close. Step 5 Step 3 Step 4 Step 6 Move the frame latch safety hook into the closed...
- Page 6 Step 8 Step 10 Open the seat post quick-release lever and raise If you are unfolding your pedals, flip the pedal into the saddle to the desired height. Close the seat post the horizontal position. quick-release lever. Be sure not to raise the seat Caution: Be careful not to pinch your fingers.
-
Page 7: Folding Instructions
FOLDING INSTRUCTIONS Step 4 Swing the handle post into the folded position: Step 1 upside down and flush against the front wheel. Prepare to fold your bicycle by standing on the side Be sure the front wheel stays parallel to the frame. with the chain. - Page 8 Step 6 Step 8 Rotate the cranks so that the left crank is pointed Open the frame latch lever. forward and down at a 45 degree angle. Step 8 Step 6 Step 9 Step 7 Move the frame latch safety hook to the open Fold the frame in half by swinging the front half of the frame back until the two wheels are parallel.
-
Page 9: Adjusting The Frame Latch
ADJUSTING THE FRAME LATCH Step 10 Your bicycle should arrive with the frame latch properly adjusted. However, the frame latch will need Snap the folding pedal(s) into the folded position periodic adjustment to keep it functioning optimally. If you have an aluminum frame, the frame latch will by pushing the pedal body inwards and rotating open and close with approximately 5-6 kg (11-13.2 lbs.) of force. -
Page 10: Part 7 Adjusting The Steel Handle Post Latches
ADJUSTING THE STEEL HANDLE POST LATCHES Step 2 To tighten the handle post latch, turn the handle post Your bicycle should arrive with the handle post latch properly adjusted. However, latch bolt counter-clockwise, backing it out of the the handle post latch will need periodic adjustment to keep it working optimally. threaded nut. - Page 11 This warranty does not apply to damage due to improper installation of parts or failure to properly maintain or adjust the bicycle. NOTICE: Bicycle specifications subject to change without notice. PACIFIC CYCLE LLC 4902 Hammersley Road Madison, WI 53711 Call Toll Free 1.800.626.2811...