2Rider Assembly manual 2Rider features • 4 seats for 2 riders and 2 passengers. • 8 speed gears for effortless rides. • Full suspension for max comfort and safety. • Large luggage tray for drinks and luggage. • Roof canopy to keep off sun rays.
2Rider Assembly manual Specification • Chassis Aluminum 7005T6, powder coated. • Suspension All wheels independently suspended. • Geometry Ackermann geometry, center point steering. • Wheels 20”(406) hi-pressure tires, alloy rims and hubs. • Gears Shimano 8 speed gears, 28~82” gear ratio. • Seats Adjustable for riders, fixed for passengers.
Page 4
2Rider Assembly manual Step 1: Take out all parts in the box and raise the chassis about 40 cm height for ease of assembly work. Canopy Luggage tray 2 kid seats Bow assembly Kid seats stay Kid seat safety bar Right side seat...
Page 5
2Rider Assembly manual Step 2: Insert the handlebar stem to the steerer, tighten the clamp and the setting screw.
Page 6
2Rider Assembly manual Step 3: Connect the left steering link rod.
Page 7
2Rider Assembly manual Step 4: Assemble the pedals to crank arms at both sides.* This step will not affect any other sub-assembly, you can decide do it now or later. *Note: Always screw the “R” pedals on the chainwheel side clockwise and the “L” pedals on the crank side counterclockwise.
Page 8
2Rider Assembly manual Step 5: Assemble the bow and front bumper to the chassis.
Page 9
2Rider Assembly manual Step 6: Assemble the front wheels to the front axle and hook the front V brake cable. *Tools needed:10mm Allen key wrench, 19mm open wrench.
Page 10
2Rider Assembly manual Step 7: Assemble the rear wheels to the rear dropouts and hook the rear V brake cable.
Page 12
2Rider Assembly manual Step 9: Assemble the seats, and insert the grip shifter on the right seat handlebar.
Page 13
2Rider Assembly manual Step 10: Assemble the kit seat to the kit seat stays, and assemble the kit seat subassembly to the main chassis. Insert the safety bar.
Page 14
2Rider Assembly manual Step 11: Assemble the canopy.
Page 15
2Rider Assembly manual Step 12: Align the handlebar and front wheels, adjust the derailleurs and brakes, and check all bolts and nuts are tight. Note: If you remove the canopy, 2Rider can stand up to save storage space.