Ir Pass-Through Connection; Wire-Connecting To Network; Bdl5560El - Philips Signage BDL5560EL User Manual

3.6.

IR Pass-through Connection

3.7.

Wire-connecting to Network

If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files via Local Area Network
(Page 16) for more detail.
PC
To setup the network:
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press [ ] HOME button on the remote control, then select
Connect to network
4. Select
5. Follow the on-screen instructions to install the network.
6. Wait for this display to find the network connection.
7. If you are prompted, agree to the "End User Licence Agreement".
NOTE: C onnecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
(DVD / VCR / VCD)
Remote Control
(BDL4765EL)
INTERNET
ROUTER
[RJ-45]
Setup
] button.
, then press [
[IR OUT]
[RJ-45]
.
15
DVD / VCR / VCD
[IR IN]

BDL5560EL