TRIVIEW TLM-1901W Operating Instructions Manual page 11

Prompt：
No Available Signal：Under VGA or DVI mode, the "NO SIGNAL" prompt will show up
in 0.5sec. as soon as the cable unplug or signal loss, such as PC get into standby
mode;
then "GOING TO SLEEP" will show up in 6sec.
Input signal can't support：Under VGA or DVI mode, "NON SUPPORT TIMING" will
show on screen in 1sec. during the input signal out of monitor's display capability.
Menu and function：
BRIGHTNESS, CONTRAST, DISPLAY ADJUST, COLOR TEMPERATURE,
LANGUAGE, OSD ADJUST, ASPECT RATIO, AUDIO CONTROL, INPUT SELECT,
RESET, EXIT.
9