Sangean WR-15 User Manual page 9

Operating your radio AM
. Connecting the antenna
The radio comes with built-in AM antenna which should be enough
for normal listening. To improve the AM reception, you may connect
the outdoor AM antenna with AM antenna terminal (USA version
only).
. Turn on your radio by switching the Power knob to volume position.
Then rotate the Band selecting rotary to AM position.
3. Rotate the Tuning Control to select the desired station. On AM,
the tuning scale is marked in kHz (Kilohertz). The tuning LED will
appear brightest when best tuning has been achieved.
4. Rotate your radio for best reception.
5. Adjust the Volume Control for comfortable listening.
6. To switch off your radio, turn the power knob to OFF position.
Note:
When your radio has any interference in AM band by its adaptor,
please move your radio away from its AC adaptor over 30 cm.
Listening to music via Bluetooth streaming
(available only in WR-15BT)
You need to pair your Bluetooth device with your radio before you
can auto-link to play/stream Bluetooth music through your radio.
Paring creates a `bond' so two devices can recognize each other.
GB
8