Inserting Silence At The Set Position (Insert Mute) - Tascam HS-20 Owner's Manual

7 – Timeline mode
6. Select a file to insert on the BROWSE screen, and touch the
Insert File button.
7. When the pop-up window to select the insertion point
opens, touch either the Current Position or File T/C button to
start insertion.
Then, select the CANCEL button to return to the BROWSE
screen.
NOTE
If the selected file contains no timecode information when
the File T/C button is touched, the file will be inserted at 00 h
00 m 00 s 00 f.
NOTE
If you select a file from other than the current folder, the file
is copied to the current folder and then inserted.
A "Cannot Copy. " pop-up window appears when a file with
the same name exists in the current folder.
To change the file with the same file name, touch the
RENAME button, or touch the CANCEL button to cancel.
8 When insertion is complete, the Home Screen will open after
a pop-up window is shown and the EDIT pull-up menu is
closed.
50
TASCAM HS-20
Inserting silence at the set position (Insert
Mute)
You can insert silence at the set position.
NOTE
• All regions following the IN point will move backward.
• When inserting into a region, two regions will be created:
before the timeline cursor and after the timeline cursor.
• When the set position is located in a fade-in or fade-out, the
fade information will be cleared.
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
3 Touch the SET/SELECT button and select the region where
you want to insert silence using the SET IN, SET OUT and
SELECT Region buttons on the pull-up menu.
5. Touch the EDIT button to open the pull-up menu.
6. Touch the Insert Mute button on the pull-up menu. When
mute insertion is complete, the Home Screen will open after
a pop-up window is shown.
In this case, the EDIT pull-up menu will remain open.