Table of Contents
Advertisement
3.
PPPoA/PPPoE
Select this option if your ISP requires you to use a PPPoE connection. This option is typically
used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your
PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE connection.
Please enter the information accordingly.
Service name: Specify a name for the PPPoE/PPPoA connection for recognition.
Username: Enter your username for your PPPoE/PPPoA connection to identify and verify
your account to the ISP.
Password: Enter your password for your PPPoE/PPPoA connection.
Encapsulation: For both PPPoE/PPPoA connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
Bridge Interface: Activate the option, the Router can also work in Bridge mode.
TD-8817B
ADSL2+ Modem Router User Guide
Figure 4-9
23
Advertisement
Table of Contents
