Step 2: Open The Dome Cover - LevelOne FCS-3064 Hardware User Manual

Fixed network camera

Hide thumbs Also See for FCS-3064:

Table of Contents

Hardware Manual

Step 2: Open the Dome Cover

NOTE:

To avoid scratches or leaving fingerprints on the dome cover, it is recommended to retain

the plastic covering the dome cover until the camera is completely installed.

1. With the bundled hex screwdriver, loosen the three (3) screws securing the dome cover.

2. Lift to remove the dome cover.

3. For D61A, D62A, E66A, E67A, remove the styrofoam covering the camera lens.

Table of Contents