Table of Contents
Advertisement
9.4 Copy features
Feature/Code
Changing the default copy
resolution
{#}{4}{6}{1}
Holding the previous contrast
setting
{#}{4}{6}{2}
Holding the previous page
layout setting
{#}{4}{6}{7}
Holding the previous zoom
(enlargement / reduction)
setting
{#}{4}{6}{8}
Holding the previous collate
setting
{#}{4}{6}{9}
9.5 PC print features
Feature/Code
Changing the data timeout
setting
{#}{7}{7}{4}
Selection
To change the default resolution setting for copying.
{1} "TEXT/PHOTO": For documents containing both text and photographs.
{2} "TEXT" (default): For documents containing only text.
{3} "PHOTO": For documents containing photographs, shaded drawings, etc.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
Selection
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {MENU} i {#}{7}{7}{4} i {SET}
2. Enter the desired data timeout setting from "005" seconds to "600"
seconds, using the dial keypad.
L The default setting is "060" seconds.
3. {SET} i {MENU}
9. Programmable Features
55
Advertisement
Table of Contents
