Presser foot pressure
The presser foot pressure is adjusted
with the dial on the front of the
machine. Normal setting is 4. The
higher the number the more pressu-
re on the fabric. Knit and Soft fabrics
should be sewn at low pressure.
Presser foot lever
The presser foot is raised and lowe-
red with the presser foot lever. The
presser foot must be lowered when
sewing. The machine will not start
if the presser foot is in the raised
position.
By raising the presser foot lever as
far as it goes and holding it there,
the lift height of the presser foot can
be increased by several millimeters.
Changing the presser
foot
1. Make sure that the needle is in
the highest position. Pull the
presser foot down and towards
you.
2. Line up the cross pin on the foot
between the spring and the press-
ser foot ankle. Press back until
the foot snaps into place.
Instruction book Lily 555/545
15