Maintenance; Replacing The Filter Cartridge - Sanyo PLC-XP200L Service Manual

Maintenance

Replacing the Filter Cartridge

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged
with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup and adversely
affect the life of the projector. This projector has an electrically operated filter which helps you to replace the filter
easily. The projector monitors the condition of the filter at all time and replaces a filter with a new one automatically
when it detects the clogging.
If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement
icon appears on the screen and the WARNING FILTER indicator on the top panel lights up. When you see this icon,
replace the filter cartridge and reset the Filter counter and the Scroll counter.
1
Turn off the projector, and unplug the AC power cord
from the AC outlet.
2
First, clean up the dust on the projector and around the
air vents.
3
Press d on the filter cover to release the latch and open
the filter cover.
4
Pull out the filter cartridge. When taking out the filter
cartridge, put your finger on the filter cartridge's tab and
then pull.
5
Put the new one back into the position and close the
filter cover. Make sure that the filter cartridge is properly
and fully inserted.
Connect the AC power cord to the projector and turn
6
on the projector.
7 reset the filter counter and the scroll counter.
cAutIoN
Do not operate the projector with the filter removed.
Dust may accumulate on the optical elements de-
grading the picture quality.
Do not put anything into the air vents. Doing so may
result in malfunction of the projector.
recoMMeNdAtIoN
We recommend avoiding dusty/smoky environments
when operating the projector. usage in these environ-
ments may cause a poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, liquid crystal panels, or op-
tical elements inside the projector. Such condition may de-
grade the quality of the projected image.
When the symptoms above are noticed, contact your autho-
rized dealer or service station for proper cleaning.
order rePLAceMeNt FILter cArtrIdGe
type No. PoA-FIL-131
Service Parts No.: 610 334 3747
Filter cover
Tab
-9-
Latch
Filter cartridge