Mazda 6 2007 Owner's Manual page 293

NOTE
To prevent damage to the wiper arm
blades when raising both the driver and
passenger side wiper arms, raise the
driver side wiper arm first. Conversely,
when setting down the wiper arms, set
the passenger side wiper arm down
first.
1. Raise the wiper arm and turn the blade
assembly to expose the plastic locking
clip.
Compress the clip and slide the
assembly downward; then lift it off the
arm.
CAUTION
To prevent damage to the windshield let
the wiper arm down easily, don't let it
slap down on the windshield.
Plastic locking clip
Owner Maintenance
2. Hold the end of the rubber and pull
until the tabs are free of the metal
support.
Tab
3. Remove the metal stiffeners from the
blade rubber and install them in the
new blade.
Maintenance and Care
Metal support
8-29