Switches And Controls; Lighting Control - Mazda 6 2007 Owner's Manual

Driving Your Mazda

Switches and Controls

Lighting Control

Headlights
To turn on the lights, turn the headlight
switch on the end of the control lever.
Switch Position
Headlights
Taillights
Parking lights
License lights
Side-marker lights
Dashboard
illumination
NOTE
If the light switch is left on, the lights
will automatically switch off 30
seconds after turning the ignition
switch to the LOCK position or
removing the key.
The lights will automatically switch
back on when the ignition switch is
turned to the ACC or ON position.
To prevent discharging the battery,
don't leave the lights on while the
engine is off unless safety requires
them.
í
5-40
Some models.
Off Off On
Off On On
Xenon fusion headlight bulbs
The low-beam bulbs of the headlights
have xenon fusion bulbs that produce a
bright white beam over a wide area.
WARNING
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement is
necessary.
NOTE
If the headlights flash, or the brightness
weakens, the bulb-life may be depleted
and a replacement is necessary. Consult
an Authorized Mazda Dealer.
Lights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
í