Panasonic CF-C2 series Operating Instructions Manual page 34

Troubleshooting (Basic)
 Touch Pad / Screen
Cannot point the correct
position using the included
digitizer pen.
 On-screen Document
The document of PDF for-
mat is not displayed.
 Others
No response.
The battery status indicator
lights green and then turns
off immediately.
The recovery disc for Win-
dows 8 in not functioning.
34
 Perform the screen calibration (
 Use the included pen.
 On the Windows logon screen or the Welcome screen, you may not be able to point the
correct position using the included digitizer pen. Use the keyboard or the touch pad to
log on.
 You may not be able to point the correct position using your fi nger after resuming from
sleep or hibernation while the display is rotated.
 If this is the case, proceed as follows.
A
1. Right-click any empty location on the Start screen, and click [All apps] on the tool-
bar.
2. Click [Run] under "Windows System", input [c:\util\resset\resset.exe] and click [OK].
Click (Start) and input "c:\util\resset\resset.exe" in [Search programs and fi les],
Enter
then press .
B Click [Yes] on the [User Account Control] screen.
C Select [Disabled] and click [OK].
D Click [Yes] when you are prompted to restart the computer.
 Install Adobe Reader.
A Log on to Windows as an administrator.
B Click (Start) and input "c:\util\reader\Pinstall.bat" in [Search Programs and fi les]
Enter
then press .
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help]
- [Check for Updates...].
Ctrl Shift Esc
 Press + +
that is not responding.
 An input screen (e.g., password input screen at startup) may be hidden behind another
Alt Tab
window. Press +
 Slide the power switch for four seconds or longer to shut down the computer, and then
slide the power switch to turn it on. If the application program does not work normally,
uninstall and reinstall the program. To uninstall,
A Open the Control Panel.
1. Right-click any empty location on the Start screen.
2. Click [All apps] on the toolbar.
3. Click [Control Panel] under "Windows System".
Click (Start) - [Control Panel].
B Click [Program] - [Uninstall a program].
 When the battery is fully charged and the computer is not operating (i.e., it is turned off
or in sleep mode), the power supply from the AC adaptor stops and power consumption
is inhibited. In such cases, the indicator will light green upon connecting the AC adaptor,
but only for a moment.
 Perform recovery using the recovery disc for Windows 7 fi rst, and then perform recovery
using the recovery disc for Windows 8.
Reference Manual "Screen Input Operation" ).
to open Task Manager and close the software application
to check.