Table of Contents
Advertisement
3.2
Connecting with WPS
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network
quickly.
If your wireless router supports WPS, you can establish a wireless connection between wireless card
and router using either Push Button Configuration (PBC) method or PIN method. Three WPS
connection methods are listed in the following parts, while the third method is only supported in
Windows XP and Windows Vista.
3.2.1 PBC (Push Button Configuration) method
Step 1.
Press the WPS button on the router.
Step 2.
Open PLANET Wireless Utility and click WPS tab. Select Push the button on my access
point or wireless router and then click Connect.
Step 3.
The adapter will be connecting to the target network.
802.11n Wireless PCI Express Adapte
Figure 3-2-1
17
r
WNL‐9501
Advertisement
Table of Contents
