Table of Contents
Advertisement
Two short flashes of the direction
indicators confirms that all the doors and
the luggage compartment lid have been
locked and that the alarm has been
armed.
Luggage compartment lid
Note: The luggage compartment lid
cannot be closed and, will pop back up if
the passive key is located inside the
luggage compartment with the doors
locked.
Note: If a second valid passive key is
located within the luggage compartment
lid detection range, the luggage
compartment lid can be closed.
Unlocking the vehicle
Note: If the vehicle remains locked for
longer than three days, the keyless
system will enter an energy-saving mode.
This is to reduce the discharge of the
vehicle battery. When the vehicle is
unlocked while in this mode, the reaction
time of the system may be a little longer
than normal. Unlocking the vehicle once
will deactivate the energy-saving mode.
E87384
Press a locking button once.
Note: A valid passive key must be
located within the detection range of that
door.
Locks
One long flash of the direction indicators
confirms that all the doors and the
luggage compartment lid have been
unlocked and that the alarm has been
disarmed.
Unlocking only the driver's door
If the unlocking function is reprogrammed
so that only the driver s door is unlocked
( See Programming the remote
control (page 27). ), note the following:
If the driver s door is the first door which
is opened, the other doors and the
luggage compartment lid will remain
locked. All the other doors can be
unlocked from inside the vehicle by
pressing the unlock button on the
instrument panel. For item location: See
Quick start (page 8). Doors can be
unlocked individually by pulling the interior
door handles on those doors.
If the front passenger door is the first door
which is opened, all the doors and the
luggage compartment lid will be unlocked.
Disabled keys
Any keys left inside the vehicle interior
when it is locked will be disabled.
A disabled key cannot be used to turn the
ignition on or start the engine.
In order to use these passive keys again,
they have to be enabled.
To enable all your passive keys, unlock
the vehicle using a passive key or the
remote control unlocking function.
All passive keys will then be enabled if the
ignition is turned on or the vehicle is
started using a valid key.
32
Advertisement
Table of Contents
