Table of Contents
Advertisement
E90922
2. Install the locking wheel nut key.
3. Fully extend the wheel brace.
4. Slacken the wheel nuts.
5. Jack up the vehicle until the tyre is
clear of the ground.
6. Remove the wheel nuts and the
wheel.
Installing a road wheel
WARNINGS
Use only approved wheel and tyre
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Technical specifications (page 140).
Do not fit run flat tyres on vehicles
that were not originally fitted with
them. Please contact your dealer
for more details regarding compatibility.
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with
steel wheels.
Note: Make sure the wheel and hub
contact surfaces are free from foreign
matter.
Wheels and tyres
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.
E90922
3. Install the locking wheel nut key.
E90589
4. Partially tighten the wheel nuts in the
5. Lower the vehicle and remove the
6. Fully tighten the wheel nuts in the
7. Install the hub cap or cover using the
134
3
1
4
sequence shown.
jack.
sequence shown. See Technical
specifications (page 140).
ball of your hand.
2
Advertisement
Table of Contents
