Table of Contents
Advertisement
CAUTION
Make sure that the level is between
the MIN and the MAX marks.
Note: The brake and the clutch systems
are supplied from the same reservoir.
If the level is at the MIN mark, top up
immediately.
TECHNICAL SPECIFICATIONS
Vehicle fluids
Item
Engine oil
Coolant
Brake fluid
*
You can use an alternative SAE 5W-30 engine oil, providing it meets the specification
defined by WSS-M2C913-B.
Note: If you operate your vehicle in temperatures below -20°C (-4°F), you must not
use SAE 10W-40 engine oil.
Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-B, you must use SAE 5W-30 (preferred), SAE 5W-40 (except
Flexfuel vehicles) or SAE 10W-40 that meets the specification defined by either ACEA
A1/B1 (preferred) or ACEA A3/B3. Using these oils can result in longer engine cranking
periods, reduced engine performance, reduced fuel economy and increased emission
levels.
Capacities
Variant
All
Maintenance
Topping up
Remove the filler cap.
Top up with fluid that meets the Ford
specification. See Technical
specifications (page 123).
Recommended fluid
Ford or Motorcraft
Formula E SAE 5W-30
*
Engine Oil
Motorcraft SuperPlus Anti-
freeze
Ford or Motorcraft Super
DOT 4 Brake Fluid
Item
Windscreen and rear
window washer system
123
CAUTION
Do not top up further than the MAX
mark.
Specification
WSS-M2C913-B
WSS-M97B44-D
ESD-M6C57-A
Capacity in litres
(gallons)
2.5 (0.6)
Advertisement
Table of Contents
