D-Link DIR-803 User Manual page 77

Section 3 - Configuration
Queue Priority: In this column the Queue Priority used will be displayed.
Queue Weight: After choosing to use the Weight Fair Queue option, under Queue Type, the user will be able to manual enter
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of
traffic control and data priority manipulation.
The following parameters will be available for configuration:
Checkbox: Tick this option to enable the rule specified.
Name: Enter a custom name for the rule being created here.
This name is used for identification.
Queue ID: Select the appropriate priority requirement from the
drop-down menu that will be applied to this rule. Op-
tion to choose from are Highest, Higher, Normal, and
Best Effort.
Protocol: Select the protocol used for the application for in the
drop-down menu and it will automatically place it in
the Protocol field.
Local IP Range: Enter the local IP range used here. This is the IP range
of you Local Area Network. The Router's IP cannot be
included in this range.
Remote IP Enter the remote IP range used here. This is the IP
Range: range of the public network from the Internet Port
side. To apply this rule to any IP addresses from the
public side, enter the range 0.0.0.1 to 255.255.255.254.
Application Enter the application port number used here.
Port:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
D-Link DIR-803 User Manual
the Queue Weight for each individual Queue ID.
73