D-Link DIR-803 User Manual page 28

Step.3:.Internet.Connection.(L2TP)
After selecting the L2TP Internet connection method, the following
page will appear:
The following parameters will be available for configuration:
Address.Mode:
L2TP.IP.Address:
L2TP.Subnet.Mask:
L2TP.Gateway.IP.Address:
L2TP.Server.IP.Address:
User.Name:
Password:
Verify.Password:
Primary.DNS.Address:
Secondary.DNS.Address:
Click Next.to continue.
D-Link DIR-803 User Manual
Here the user can specify whether this
Internet connection requires the use of a
Dynamic or Static IP address. L2TP usual
requires a Dynamic IP configuration.
Enter the L2TP IP address used here. This
option is only available if Static IP is se-
lected.
Enter the L2TP Subnet Mask used here.
Enter the L2TP Gateway IP address used
here.
Enter the L2TP Server IP address used
here. This is normally the same a the L2TP
Gateway IP address.
Enter the L2TP username used here.
Enter the L2TP password used here.
Re-enter the L2TP password used here.
Enter the Primary DNS IP address used
here.
Enter the Secondary DNS IP address used
here. This field is normally optional. Only
one DNS address is required for a func-
tional Internet connection, but using a
second DNS address provides more stabil-
ity.
24