Huawei Quidway WA1003A User Manual page 66

Static Routing specifies a route used for data traffic within your
Ethernet LAN or routes data on the WAN. All packets destined for a
particular network or subnet use a preset gateway.
I. Configuration page
Figure 4-26 Static Routing
II. Parameter explaination
Connection: choose a connection from the drop-down
menu for adding a route.
New Destination IP/Mask/Gateway/Metric: Enter the
proper parameters in these blanks and click Add. A new
static route will be added in the table below and the route
becomes active immediately.
III. Save
Click Apply to save the settings in the RAM.
Huawei Technologies Proprietary
56